Bando 650H100G H Timing Belt Conduit ConnectorsBando 650H100G The extra durable, highly flexible neoprene backing provides excellent abrasion and wear resistance especially important if power is transmitted from the back of the belt. Backing also guards the tensile cords against oil, grease, dirt, and moisture. Continuous, helically wound high strength fiberglass tensile cords guarantee dimensional stability to eliminate take up adjustments. Heavy torque loads wont fatigue this super strong cord.
Flange Size FC-149 Sealing Type V'Ring Bearing Size Bearing 205 Products Line W01 Rolled Steel Downloads
2 POLES 4 NUMBER SPEEDS 1 RPM 1735 RPM 2 1735 HERTZ 60 VOLTS PRIMARY 115/230 VOLTS 230 VOLTS 2 115 FRME 184 SHAFT CODE JP ASSEMBLY POSITION F1 MOTOR TYPE DM1 OPPOSITE END BEARING 6204-2Z-J/C3 SHAFT END BEARING 6307-2Z-J/C3 AMBIENT 40 SERVICE FACTOR 1
875 IN Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 1745 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings
Bando - 710L20 Rib Ace® is an ultra-thin
Load 57° C Start Configuration DOL Break-Down Torque 49
15 STARTCAPMFD N\A SHIPPING WEIGHT 160 BREAKDOWN TORQUE 530 BREAKDOWN TORQUE UOM PERCENT OF FLT LOCKED ROTOR TORQUE 413 LOCKED ROTOR TORQUE UOM PERCENT OF FLT INSULATION CLASS H KVA CODE LETTER N LOCKED ROTOR AMPS 106 NEMA NOMINAL EFFICIENCY 91
73 Ohms B Ph Temp
0 Wire size (AWG/kcmil) 3/0-250 Number of lugs 3
52 LOCKED ROTOR TORQUE UOM OZFT INSULATION CLASS B KVA CODE LETTER N LOCKED ROTOR AMPS 43
00 % Rated voltage 380/660 V Rated current 141/81
35E012X086G3 HP
9 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty KVA Code H Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator No Locked Bearing Max Speed 5400 rpm Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 3 @ 14 AWG Motor Type 0732M Mounting Arrangement F1 Number of Poles 2 Overall Length 19
